ApplicationXtender - Dual Write Path (DWP) error

Owned by Chad Nissen
May 28, 2020
1 min read

No config data or config data is empty for file WxRender.DWP.config![ImageServerConfig::Save_ConfigurationFile]


Applies to

  • ApplicationXtender Desktop 6.5, 7.0, 8.0, 8.1


Summary

No config data or config data is empty for file WxRender.DWP.config![ImageServerConfig::Save_ConfigurationFile]


Resolution

If you want to stop these errors from occurring, you can do the following steps:

  1. Add a dual write path in AX Administrator.

  2. Run component registration.

  3. Remove the dual write path from AX Administrator.

  4. Run component registration.

 

Cause

This is normal behavior.  Dual Write Paths or (DWP) are not configured in AX Administrator.  These errors can be ignored.

Error is being logged in Event Viewer and Web Access.NET logs when viewing documents No config data or config data is empty for file WxRender.DWP.config![ImageServerConfig::Save_ConfigurationFile]

Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="WxRender" />    <EventID Qualifiers="16384">1</EventID>    <Level>2</Level>    <Task>0</Task>    <Keywords>0x80000000000000</Keywords>    <TimeCreated SystemTime="2013-04-12T20:06:39.000000000Z" />    <EventRecordID>39613</EventRecordID>    <Channel>Application</Channel>    <Computer>xxxxxxxx.xxxx.xxxx.xxxxx</Computer>    <Security />  </System>  <EventData>    <Data>No config data or config data is empty for file WxRender.DWP.config![ImageServerConfig::Save_ConfigurationFile]</Data>  </EventData></Event>

CASO Knowledge Base